xxxxxxxxxxxxxxxxxxxx
Contact Info:
Sullins International, Inc.
801 East Jackson Place
Broken Arrow, OK 74012
Tel: 918-258-5460
Fax: 918-258-2497
email: ndtsales@sullinsndt.com
Site last updated:
20 JUNE 2008
Penetrameter Shims / Comparator Shims
PENETRAMETER SHIMS
| Carbon Steel Standard Penetrameter Shims |
| Size | Price (USD) |
| 1/64" | 0.70 |
| 1/32" | 0.70 |
| 1/16" | 0.70 |
| 3/32" | 0.80 |
| 1/8" | 0.80 |
| 3/16" | 0.90 |
| 1/4" | 0.90 |
| 3/8" | 1.20 |
| 1/2" | 1.50 |
| 1" | 3.00 |
| Part Number: | Carbon Steel Penetrameter Shim (specify size) |
| Description: | Our standard penetrameter shims meet all requirements of ASME Sec. V, Par. 6.1 and API Std. 1104, Par. 8.41, for use as simulated weld build-up. They are manufactured from a good grade of 1018 cold roll steel strap. Tolerance and finish are well within the ranges required by code. |
| Weight: | Less than 1 oz. |
| Dimensions: | See above |
| Other Information: | Special sizes are also available upon request. |
| Stainless Steel Standard Penetrameter Shims |
| Size | Price (USD) |
| 1/64" | 1.30 |
| 1/32" | 1.30 |
| 1/16" | 1.30 |
| 3/32" | 1.40 |
| 1/8" | 1.40 |
| 3/16" | 1.50 |
| 1/4" | 1.50 |
| 3/8" | 2.00 |
| 1/2" | 2.10 |
| 1" | 4.50 |
| Part Number: | Stainless Steel Penetrameter Shims (specify size) |
| Description: | Our standard penetrameter shims meet all requirements of ASME Sec. V, Par. 6.1, A.S.T.M. E-142 (SE-1025), Par. 6.1 and A.P.I. Std. 1104, Par. 8.41, for use as simulated weld build up. They are manufactured from a good grade of 304 stainless steel strap. Tolerance and finish are well within the ranges required by code. |
| Weight: | Less than 1 oz. |
| Dimensions: | See above |
| Other Information: | Special sizes are also available upon request. |
| Aluminum Standard Penetrameter Shims |
| Size | Price (USD) |
| 1/64" | 1.30 |
| 1/32" | 1.30 |
| 1/16" | 1.30 |
| 3/32" | 1.40 |
| 1/8" | 1.40 |
| 3/16" | 1.50 |
| 1/4" | 1.50 |
| 3/8" | 2.00 |
| 1/2" | 2.10 |
| 1" | 4.50 |
| Part Number: | Aluminum Penetrameter Shim (specify size) |
| Description: | Our standard penetrameter shims meet all requirements of ASME Sec. V, Par. 6.1, A.S.T.M. E-142 (SE-1025), Par. 6.1 and A.P.I. Std. 1104, Par. 8.41, for use as simulated weld build-up. They are manufactured from a good grade of aluminum sheet. Tolerance and finish are well within the ranges required by code. |
| Weight: | Less than 1 oz. |
| Dimensions: | See above |
| Other Information: | Special sizes are also available upon request. |
| Comparator Shims |
| Price: USD $20.00 ea | |
| Part Number: | Comparator Shim |
| Description: | Meets API 1104, 13th edition requirements. Comparator shims can be used in conjunction with or in lieu of penetrameter shims as required by par. 8.4. Other configurations and dimensions may be used provided notches are "V" shaped 45º included angles and depth tolerances are + or - 0.001. |
| Tolerances: | Notch locations + or - 1/64. Dimensions should exceed penetrameter size by at least 1/8" on three sides. |
| Weight: | Less than 1 oz. |
| Dimensions: | |
| Other Information: | Standard: 3/4" x 1 3/4" x 3/32" with .008" notch on 1/4" center, .016" notch on 3/4" center, and .032" notch on 1 1/8" center. |